DIY: Make a FourWay Strobe Bracket out of PVC Pipe

DIY: Make a FourWay Strobe Bracket out of PVC PipeSome do-it-yourself projects require special tools and hours of time. This is not one of those projects. The four-way strobe bracket takes little time to create and can be produced on the cheap.

The directions are simple. Screw a cold shoe onto a four-way PVC tee, glue on a PVC cap and then drill to make your holds. That’s all there is to it.

DIY Photography

Comments

comments

Please Share if you find it Interesting

PinIt